Adjusting The Pretravel & Overtravel On The TG2000 Trigger Group
Before We Begin
Warning!
- Always make sure the firearm is unloaded before performing any work it!
- Remove all ammunition from the work area before working on any firearms.
- Always wear safety glasses when performing any work on a firearm.
Related Products
Video Instructions
How to adjust the pretravel and overtravel on your TG2000 Trigger Group. The TG2000 is designed to be a drop-in installation with no modifications required. The trigger pull weight has been set at the factory and is not adjustable by the end user. The only adjustments that can be made are to the pretravel and overtravel screws as demonstrated here.
Tools Needed
- 1/16" Allen wrench
- 5/64" Allen wrench
- A clean, non-slip surface, such as our Cleaning Mat
