Installation of the TG2000 Rapid Release
Before We Begin
Warning!
- Always make sure the firearm is unloaded before performing any work it!
- Remove all ammunition from the work area before working on any firearms.
- Always wear safety glasses when performing any work on a firearm.
Related Products
Installation of the TG2000 Rapid Release
Our TG2000 Rapid Release allows you to change magazines quickly while maintaining your grip on your rifle. This is done by utilizing two paddle release buttons that extend downward from the main magazine release. Either of these paddles can be removed, using the included hex key, or both can be kept on for ambidexterity. Our TG2000 Rapid Release is only compatible with our Volquartsen TG2000 or TGS (Summit) Trigger Group.
Tools Needed
- 3/32 Hex key (included)
- 3/32 Hey key
- A clean, non-slip surface, such as our Cleaning Mat
Installation
Step 1
Remove the stock from your rifle, refer to your owner's manual for more information.
Remove the TG2000 Trigger Group from the rifle.
Step 2
Use the included 3/32" hex key to push out the Magazine Release Pin.
Push back on the Magazine Release Plunger and slide out the factory Magazine Release. Do not let go of the plunger.
Step 3
Slide the TG2000 Rapid Release into the trigger group and reinstall the pin you moved previously.
Perform a function check and reassemble the rifle.
