In Depth Cleaning of the Env Pistol 2.0
Before We Begin
Warning!
- Always make sure the firearm is unloaded before performing any work it!
- Remove all ammunition from the work area before working on any firearms.
- Always wear safety glasses when performing any work on a firearm.
In Depth Cleaning of the Env Pistol 2.0
The cleaning process with the rifle Competition Bolt 2.0 installed.
Here's a look at the cleaning process for our ENV pistol. This process applies to both our 22 LR models and 17 HMR model. One thing we get asked often is how often they should be cleaned. Unfortunately, that is not a clear-cut answer and depends on several factors, including the type of shooting you are doing and the type of ammo being used.
Once you are finished cleaning, it is recommended to shoot about 50 rounds through it to ensure function if you are cleaning before a competition or hunt.
You should also be aware that cleaning the bore will affect accuracy for the first 20 rounds until the bore gets seasoned.
If your ENV has our classic Rifle Competition Bolt, use this alternative cleaning video.
Tools Needed
- Nitrile gloves
- Shop towels
- Canned Air
- Oil
- Torque Driver
- Bit Driver
- 9/64 bit
- 3/32 hex key
- Nylon brush
- Pick
- Bore Snake
- A clean, non-slip surface, such as our Cleaning Mat
