Optic Installation Guide for Universal Red Dot Mount for Rifles
Before We Begin
Warning!
- Always make sure the firearm is unloaded before performing any work it!
- Remove all ammunition from the work area before working on any firearms.
- Always wear safety glasses when performing any work on a firearm.
Related Products
Tools Needed
- A clean, non-slip surface, such as our Cleaning Mat
Important Information!
Please note that all mounting holes in your upper have come from the factory
with pre-installed filler screws. You will need to remove the screws from
all applicable holes before using them to mount your optic.
![Universal Red Dot Mount Guide](https://assets.volquartsen.com/image-assets/2954/800x800.webp?t=1635794907)
Be careful to use the correct size hex driver to remove any filler screws or install any mounting screws. Do not over tighten screws.